Acts Online
GT Shield

Occupational Health and Safety Act, 1993 (Act No. 85 of 1993)

Code of Practice

National Code of Practice for Electrical Machinery in Hazardous Locations

Regulatory requirements for explosion-protected apparatus

7. Apparatus marking

 

7.1 General

 

Due to the potential disastrous consequences if the wrong equipment is used, all equipment shall be clearly labelled with information supporting the safe use of the equipment.

 

NOTE   Annex C gives information on the marking of explosion-protected equipment certified under different product certification schemes.

 

7.2 Marking

 

Marking shall be

(a) durable,
(b) visible in all installation configurations, and
(c) legible.

 

7.3 Test for durability

 

7.3.1 Rub the marking lightly for 15 s with a piece of cloth soaked with water.

 

7.3.2 After drying, rub for a further 15 s with a piece of cloth soaked with white spirit.

 

NOTE  White spirit is also known as mineral spirits, mineral turpentine,turpentine substitute, petroleum spirits, and solvent naphtha (petroleum), and composed of a mixture of aliphatic and alicyclic C7 to C12 hydrocarbons with a maximum content of 25 %, by mass, of c7 to c12 aromatic hydrocarbons. This will not affect the marking.